Error message "Parts inside the printer have reached the end of their service life"
RELATES TO:
·
Status Monitor error message
·
LCD panel error message
·
Explanation of the message
EXPLANATION:
Please
explain the message I am getting in my printer driver that says 'parts inside
the printer have reached the end of their service life'.
Like so many other products, Epson consumer
Inkjet products have a finite life span due to component wear during normal
use. At some point the product will reach a condition where either satisfactory
print quality cannot be maintained or components have reached the end of their
usable life.
This is normal operation for a sophisticated
mechanical device.
·
Which parts are we
talking about?
The message refers to
the ink pads, which
are porous pads inside the printer that collect, distribute, and contain the
ink that is not used on the printed page. Ink is collected by these pads during
the initial setup of the product, during cleaning cycles and when printing
borderless photographs.
·
Why does my printer stop
functioning when I get this message?
Epson has implemented
this safety characteristic in their inkjet printers to stop operation at the
point where continued use of the product would lead to ink leaking from the
printer, which would either cause damage to the environment in which the
printer is located or in the worst case cause an electrical fault within the
printer which could lead to a fire and/or electrocution.
Epson is committed to
ensuring the proper operation of all our devices to minimise the risk of
property damage or personal injury during the life of the product.
·
What do the Ink pads look
like?
If you do choose to
disassemble your product, the ink pads may appear completely saturated with ink
or may still have some white areas that have not been completely saturated with
ink, depending on usage patterns.
A very high-volume user
will saturate the pads more quickly because ink evaporation will not be as
effective. For a low-volume user, longer evaporation periods may result in
portions of the pads appearing unused. The ink pad life counters are designed
to prevent risk in all cases.
·
Is anything being done to
change this situation?
Epson continually strives
to increase the durability and longevity of our products. This is done through
ongoing improvements in design to reduce the amount of ink being deposited to
the ink pads and optimisation of the sizes of the pads.
The intent is to ensure
the ink pads meet or exceed the expected life of the product. However, the
end-of-service-life message will likely continue to appear because it is not
possible to completely eliminate the risk of ink spills.
·
Can I service my own
printer?
Epson does not consider
our Inkjet printers to be user serviceable, due to the specific knowledge and training
required to successfully disassemble, repair and reassemble the products.
·
At what point should a
user expect to get this message?
We are unable to state a
defined 'point in time' at which a product will reach the service request. This
is because a number of variables affect this calculation such as frequency of
use, number of head cleans, number of cartridges used, type of prints being
printed (e.g. images, documents, with borders or borderless), number of times
the product is switched on and off. Our products are designed to last a
significant number of years through expected usage before this maintenance
point is reached.
·
Is there anything I can
do to continue to use my printer?
Please contact Epson for
information about repair options.
![]() |
We will not repair or replace products if, in our opinion, the
problem is due to:
·
Externally caused damage;
·
Use outside specification (as defined by the product
manufacturer, whose decision whether a product is used outside its
specification or not is final);
·
Accessories, parts or consumables which are not Epson branded
or approved; or
·
Modifications made to the product as originally supplied by
Epson;
|
Comments
Post a Comment